1.11 Immergas flue systems. 1.12 Tables of resistance factors and equivalent lengths. 1.13 Outdoor installation in partially protected area. 1.14 Internal.
For buildings not equipped with telephone network. Available for all Immergas models.
Allows to check the DHW temperature of a commercial Storage Tank Unit with the Immergas boiler <35 kW.
Provided as per standard on all Storage Tank Units in the catalogue.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).
For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
For all gas boiler < 35 kW except HERCULES models
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* as standard
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* as standard
For buildings equipped with telephone network. Available for all Immergas models.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
For HERCULES Condensing and HERCULES Solar.
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO ErP and MAGIS COMBO.
To be used with radiant systems that also work in cooling mode.
Da utilizzare in presenza di sistemi integrati, solo in abbinamento al gestore di sistema (cod. 3.021522). Permette di gestire ausiliari quali: pompa di circolazione, valvola miscelatrice, deumidificatore, pompa di ricircolo, valvole 3 vie deviatrici per riscaldamento/raffrescamento. Da alimentare in bassa tensione (24 Vac).
Dedicated to GAUDIUM SOLAR 2 zones/PLUS ErP and DIM 2/3 zones ErP or to kit code no. 3.021527 and 3.021528 (to be installed on the delivery manifold).
Da utilizzare con gestore di sistema per integrazione elettrica/gestione caldaia o richiesta raffrescamento deumidificatore.
To be used for electric integration.
For UB Inox 120-2 and UB Inox 200-2.
Ideal for solar thermal systems with exclusive integration of domestic hot water, thanks to the probe supplied as per standard, it controls the circulation pump based on the real availability of solar energy and the temperature of the solar storage tank.
Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.
Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.
Positioned on the delivery pipe, after the hydraulic separator, it allows the cascade and zone regulator to control system temperature as well as that of any mixed zones.
Connected to the cascade and zone regulator, it optimizes energy consumption by correcting the delivery temperature to the system for smooth temperature function
If the cascade and zone regolator is not install inside an electrical box.
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
Per ARES TEC ErP.
Gestisce elettronicamente fino a un massimo di 8 ARES TEC ErP in batteria raggiungendo range di modulazione da 22 fino a 6.912 kW (es. con 8 ARES 900 TEC ErP).
Per installazione ARES TEC ErP.
Permette di gestire e visualizzare i parametri della singola zona escludendo il relativo menù dalla caldaia.
Per installazione ARES TEC ErP.
Comprensivo di due sonde impianto, consente di gestire ulteriori 2 zone dirette/miscelate. Si possono utilizzare fino a 7 moduli; considerando le zone già gestite dalla caldaia, si possono comandare quindi fino a 15 zone dirette/miscelate, 1 circuito sanitario e 1 circuito solare.
Per installazione ARES TEC ErP.
Da utilizzare per gestire anche la zona 1 della caldaia come zona miscelata e per controllare la temperatura dell'acqua sanitaria in un bollitore con integrazione solare termico.
Per installazione ARES TEC ErP.
Permette di regolare parzialmente la temperatura ambiente dal locale di installazione non escludendo il relativo menù dalla caldaia.
L=12 m + 4 centering spacers.
For condensing boilers.
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Vertical outlet kit Ø 80/125 for flexible ducting system Code 3.014174
4 extension pipes Ø 80 kit 0,5 m long Code 3.014642
For condensing boilers < 35 kW.
Ø 125 adapter kit for C9 ducting system Code 3.022033
Extension pipe kit Ø 60/100 0,5 m long Code 3.014643
Anti-wind vertical terminal kit Ø 80 Code 3.021721
Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge Code 3.016365
For condensing boiler < 35 kW.
Components support kit Ø 50 mm for flexible ducting system Code 3.027355
Flexible chimney ducting system for condensing boilers.
For condensing boilers < 35 kW.
Flanged stub-pipe Ø 80 for flue discharge Code 3.016364
Vertical outlet kit for ducting system Ø 60 Code 3.012112
Flange Ø 60/100 coupling Ø 80/125 adapter kit Code 3.022990
To be used with the concentric kits.
For condensing boiler < 35 kW.
Ø 100 adapter kit for C9 ducting system Code 3.022032
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
Push-fitting extension pipes kit 1 m for ducting system Ø 60 Code 3.012144
Kit support components for flexible ducting system Code 3.014171
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
Ø 80 'T-shaped' terminal kit Ø 80 (C5) for flexible ducting system Code 3.027356
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
For condensing boiler < 35 kW.
Kit support components for flexible ducting system Code 3.014171
Push-fitting extension pipes kit 2 m for ducting system Ø 60 Code 3.013869
Push-fitting extension pipes kit 1 m for ducting system Ø 60 Code 3.012144
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For flexible ducting system, Ø 80.
For condensing boilers.
90° bend terminal kit Ø 50 (C5) for flexible ducting system Code 3.027357
Flexible chimney ducting system for condensing boilers.
For VICTRIX PRO.
Flexible/flexible adapter kit for flexible ducting system Ø 50 Code 3.027359
Flexible chimney ducting system for condensing boilers.
Vertical terminal kit Ø 80/125 for flexible ducting system Ø 50 (C5+C9) Code 3.027358
Flexible chimney ducting system for condensing boilers.
Support bend kit for ducting system Ø 60 Code 3.012153
Lunghezza 956 mm, estensione massima 12,9 metri.
Utilizzabile solo per caldaie a condensazione < 35 kW.
For VICTRIX PRO.
Adjustable support chimney hanging bracket, for ducting system.
For traditional and condensing boilers < 35 kW.
HERCULES Condensing B22 - B23 terminal kit Code 3.020004
Per modelli non omologati per esterno e aspirazione diretta dell'aria da locale tecnico d'installazione.
Per ARES CONDENSING 32 ErP e gamma HERCULES ErP.
Extension pipe kit Ø 60/100 1 m long Code 3.012089
Spacer pipe clamp kit for ducting system Ø 60 Code 3.012146
Pipe clamp kit for ducting system Ø 60 Code 3.012145
Concentric horizontal outlet Ø 60/100 Code 3.016836
Utilizzabile solo per caldaie a condensazione < 35 kW.
For traditional boilers.
For traditional boilers.
Flanged stub-pipe Ø 60/100 vertical outletCode 3.011141
For traditional boilers, Ø 80.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers.
Insulated twin pipes complete kit Ø 80/80Code 3.010233
For traditional boilers.
For traditional boilers.
For traditional boilers.
For traditional boilers.
For traditional boilers.
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers.
For traditional boilers.
For traditional boilers.
Concentric vertical complete kit Ø 80/125Code 3.010352
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
Concentric horizontal complete kit Ø 80/125Code 3.010526
For traditional boilers, Ø 80 mm ducting system.
Concentric vertical outlet Ø 60/100 (red ocher color)Code 3.015631
Vertical flue outlet for twin pipes Ø 80Code 3.010963
1 insulated extension pipe Ø 80 1 m longCode 3.010947
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers.
For traditional boilers.
1 insulated extension pipe Ø 80 2 m longCode 3.010948
For traditional boilers.
For traditional boilers.
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers.
Concentric horizontal complete kit Ø 60/100 STARCode 3.014147
For installations in central heating systems with VICTRIX PRO and for RAPAX.
For RAPAX V2, heat pump water heater.
Using this kit you can match these kits:
- Extension pipe kit Ø 160 0,5 m long – code 3.024659
- Extension pipe kit Ø 160 1 m long – code 3.024516
- 87° bend kit Ø 160 - code 3.024517
- 2 x 45° bend kit Ø 160 - code 3.024518
Cascade installation - 'Green Series' exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Exhaust manifold kit 2 VICTRIX PRO 80/100/120 Ø 200 with flue lock Code 3.024281
Cascade installation - 'Green Series' exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Cascade installation - 'Green Series' exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Cascade installation - 'Green Series' exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
For installations in central heating systems with VICTRIX PRO.
For installations in central heating systems with VICTRIX PRO.
Cascade installation - 'Green Series' exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Exhaust manifold kit 2 VICTRIX PRO 35/55 Ø 160 with flue lock Code 3.024279
Horizontal kit Ø 80 (to discharge in the chimney) Code 3.015254
For installations in central heating systems with VICTRIX PRO.
Terminal vertical outlet outdoor kit Ø 80 Code 3.024295
Terminal horizontal outlet kit Ø 80 (to discharge horizontally) Code 3.015255
Per protezione antigelo fino a -15°C.
Per CAESAR 14 ErP e SUPER CAESAR 17 ErP.
to be installed for central heating systems with MAGIS PRO ErP in stand-alone configuration (kit to be placed inside hydronic unit).
230 or 400 Vac power supply required.
Per scaldabagni.
Installabile all'interno di MAGIS HERCULES ErP, il kit comprende circolatore a basso consumo, valvola miscelatrice, espansione e relè terza zona.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Usable in outdoor installations for minimum temperature as low as -15 °C.
Per protezione antigelo fino a -15°C.
Per VICTRIX SUPERIOR ErP/PLUS ErP.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per AVIO 24 ErP.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per HERCULES CONDENSING ErP.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER.
Il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per HERCULES SOLAR 200 CONDENSING.
Installabile all'interno di MAGIS HERCULES ErP.
Il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.
Polyphosphate dispenser kit
For VICTRIX SUPERIOR ErP, VICTRIX MAIOR TT, VICTRIX TT ErP, VICTRIX EXA and MAGIS COMBO.
Anti-scale kit Code 3.013499DIMV2 TOP 2 ZONE
DIM V2 TOP 2 ZONECARV2 (Comando Amico Remoto modulante)DIM V2 TOP 2 ZONE
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per scaldabagni.
Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT
To be used to manage the recirculation pump.
For wall-hung boilers: compact condensate drain pump kit.
For floor standing boilers: compact condensate drain pump kit.
for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS
Per due UB INOX 120 V2 o due UB INOX 200 V2 in parallelo.
Kit rubinetti di intercettazione da 1' con tubi flessibili in acciaio antivibranti.
Per funzionamento in luoghi parzialmente protetti.
Per CAESAR 14 ErP.
Per funzionamento in luoghi parzialmente protetti.
Per SUPER CAESAR 17 ErP.
For external installations, in partially protected places
Per funzionamento in luoghi parzialmente protetti.
Per caldaie MAGIS VICTRIX ErP, VICTRIX SUPERIOR ErP, VICTRIX SUPERIOR 32 PLUS ErP.
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Kit to be used without system manager controller. Dedicated to MAGIS PRO ErP.
Complete recharge for condensate neutralizer kit (cod. 3.023662).
To be mainly used when the pump is independently dimensioned by the designer.
To be mainly used when the pump is independently dimensioned by the designer.
Da applicare sul collettore di mandata dei kit 2 zone miscelate e 1 zona diretta cod. 3.021527 e kit 2 zone miscelate cod. 3.021528.
Per funzionamento con caldaia a condensazione in bassa temperatura diretta.
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
To consider in addition to extra pellet tank.
To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.
Only probe pipe, pump is not included.
Available for VICTRIX Zeus Superior kW.
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
It's possible install this kit inside MAGIS HERCULES.
For wall-hung outdoor boilers.
Kit optional da abbinare al DIM comprensivo di n. 2 rubinetti.
Including pipes and fittings for connection in template.
It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.
Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.
For the storage tank unit managed as a zone (with a circulator) and connected to the cascade regulator (without external 3-way valve). For solar installations managed with cascade and zone regulator two probes are necessary.
Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.
Floor-standing cabinet, it can be installed outdoor.
Code | 3.027373 |
Heat output C.H. kW | 24.1 |
Heat output D.H.W. kW | 28.3 |
Dimensions (HxWxD) mm | 748 x 440 x 256 |
Type | Heating Only |
Modulating heat output | 18 - 100% |
Heat output: 24,1 kW (central heating mode) / 28,3 kW (DHW production mode).
VICTRIX TERA is the new-generation boiler range, born for new installations and the replacemnet of existing systems. Designed to meet the new ErP and EL European Directives requirements on energy use, VICTRIX TERA boilers make high system efficiency classes both in central heating and DHW production easier and easier to achieve.
Key factors in the new range energy efficiency performances are the stainless steel condensing module and the new low energy consumption circulation pump. Power output modulation range up to 18 % of the overall capacity.
The user-friendly interface has adjustment knobs, selection buttons and LCD display, showing the operating status and any error codes. VICTRIX TERA boilers could be remotely controlled by means of PCs, smartphones and tablet touchscreens (DOMINUS app). The connection pipes covering panel is supplied as a standard, for the most harmonious integration with the whole domestic style.
Certified to be installed indoor as well as outdoor in partially sheltered places thanks to the IPX5D electric protection, the boiler is supplied with a -5°C anti-freeze kit as standard.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* as standard
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* as standard
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
For buildings not equipped with telephone network. Available for all Immergas models.
For buildings equipped with telephone network. Available for all Immergas models.
For all gas boiler < 35 kW except HERCULES models
Lunghezza 956 mm, estensione massima 12,9 metri.
Utilizzabile solo per caldaie a condensazione < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
Anti-wind vertical terminal kit Ø 80 Code 3.021721